SWMS - Security System Installer Example
Example document for SWMS - Security System Installer. Use this as a reference when creating your own.
Professional Review Required
This document involves significant legal, financial, or compliance considerations. You must have a qualified professional review and approve this document before use. Do not rely on this template as legal advice.
Document: SWMS - Security System Installer
Example Document
Last updated 7/30/2026
Company Details
Company Name: SafeSec Solutions Pty Ltd ABN: 12 345 678 901
Job Details
Job Title: CCTV Installation at Warehouse Site Address: 123 Industrial Ave, Auburn NSW Date: 15 Oct 2023
High-Risk Construction Work Checklist
- Work that involves a risk of a person falling more than 2 metres (Internal warehouse roof height is 6m)
Hazard Identification, Risk Assessment and Control Measures
| Task / Step | Potential Hazard | Risk Rating (Before Controls) | Control Measures (Hierarchy of Controls) | Risk Rating (After Controls) |
|---|---|---|---|---|
| Mounting Cameras on Warehouse Roof | Falling from height | High | Substitution: Use a Scissor Lift (EWP) instead of ladder. | |
| Administrative: EWP operator holds High Risk Work License. SWMS for EWP followed. Exclusion zone set up below work area. | ||||
| PPE: Safety Helmet, Safety Harness attached to EWP anchor point. | Low | |||
| Running Cables in Ceiling Cavity | Electric shock / Asbestos | High | Administrative: Obtained asbestos register. Confirmed no asbestos in ceiling. Isolated lighting circuits at board. Used non-contact voltage detector before drilling. | |
| PPE: Safety glasses, cut resistant gloves, P2 mask (dust). | Low | |||
| Connecting Power Supply | Electric shock | High | Engineering: Portable RCD used on power board. | |
| Administrative: Licensed electrician performing termination. Power isolated until ready to test. | ||||
| PPE: Insulated gloves, safety glasses. | Low |
Notes
This example shows how to record specific controls for high-risk tasks like working at heights and electrical isolation.
About this Example
Part of the SWMS - Security System Installer document collection
Document Type
SWMS - Security System Installer
Use this SWMS when installing security systems including CCTV, alarms, and access control in residential or commercial sites. It addresses high-risk construction work like working at heights and near electricity.