SWMS - Waterproofing Applicator Example
Example document for SWMS - Waterproofing Applicator. Use this as a reference when creating your own.
Professional Review Required
This document involves significant legal, financial, or compliance considerations. You must have a qualified professional review and approve this document before use. Do not rely on this template as legal advice.
Document: SWMS - Waterproofing Applicator
Example Document
Last updated 7/30/2026
Company Details
Company Name: Apex Waterproofing Services Pty Ltd ABN: 12 345 678 901
Project / Job Details
Project Name: Riverside Apartments Project Address: 100 Smith Street, Brisbane QLD Date of Work: 10/10/2023 to 15/10/2023
Task Description
Application of polyurethane liquid membrane to Level 4 balconies and podium deck.
Hazard Identification and Risk Assessment
| Step / Task | Hazard | Risk Before Controls | H/M/L | Who is at Risk | Control Measures | Risk After Controls | H/M/L |
|---|---|---|---|---|---|---|---|
| Surface Priming | Exposure to Solvent Primer | High | H | Applicator | 1. Ensure natural cross-ventilation. 2. Wear half-face respirator with A2 cartridges. 3. Wear nitrile gloves. | Low | L |
| Membrane Application | Fall from balcony edge | Extreme | H | Applicator | 1. Concrete edge protection already in place. 2. Do not lean over handrails. 3. Tool lanyards used. | Low | L |
| Clean Up | Chemical waste disposal | Medium | M | Environment | 1. Use waste drums. 2. Do not pour down drains. 3. Wash equipment in designated wash bay. | Low | L |
PPE
- Safety Helmet (White)
- Hi-Vis Shirt (Orange)
- Steel Cap Boots
- Chemical Resistant Gloves
- Respirator (Organic Vapour)
- Safety Glasses
Sign Off
Worker Signature: John Smith | Date: 10/10/2023 Supervisor Signature: Sarah Jones | Date: 10/10/2023
Notes
Note: This example assumes edge protection is already installed. If not, the control measure would change to 'Install temporary scaffolding'.
About this Example
Part of the SWMS - Waterproofing Applicator document collection
Document Type
SWMS - Waterproofing Applicator
This SWMS is required for tradespeople applying liquid membranes, sheet membranes, or waterproofing coatings in residential and commercial construction. It addresses high risks like working in confined spaces, chemical exposure, and working at heights.