SWMS - Bathroom / Laundry Renovator

Company / Project Details

Company Name: [ENTER COMPANY NAME] ABN: [ENTER ABN] Project Address: [ENTER ADDRESS] Date of Preparation: [ENTER DATE]

1. Job Details / Description

Scope of Work: [DESCRIBE SCOPE, e.g., Demolition of existing bathroom, removal of fixtures, waterproofing, tiling, installation of new vanity, toilet, and shower base.] Persons Involved: [LIST NAMES OR ROLES]

2. High-Risk Construction Work Checklist

Is this work high-risk construction work under WHS Regulation 2011?

• Risk of a fall over 2 metres
• Work in or near a confined space
• Demolition of a load-bearing structure
• Use of explosives
• Work on or near pressurised gas pipes
• Work on or near chemicals or fuel
• Work in an area with movement of powered mobile plant
• Work near traffic
• Work on or near electrical installations
• Work near water (drowning risk)
• Work that involves exposure to asbestos

3. Hazard Identification and Risk Assessment

Task / Step	Hazard(s) Identified	Risks / Consequences	Initial Rating (L/M/H)	Control Measures	Final Rating (L/M/H)
Site Setup & Induction	Uneven ground, trip hazards	Slips, trips, falls	M	Ensure clear access, good lighting, induction of all workers.	L
Demolition & Strip-out	Asbestos, silica dust, sharp objects, manual handling	Asbestosis, silicosis, cuts, back injury	H	Identify asbestos via survey. Use wet cutting methods for tiles. Wear P3 respirator. Use safe lifting techniques.	M
Removal of Fixtures	Heavy lifting, breakage of fixtures	Musculoskeletal injury, lacerations	M	Use mechanical aids or team lifting. Wear safety glasses and gloves.	L
Electrical Alterations	Live cables, water contact	Electrocution, electric shock	H	Isolate power at the switchboard. Use Lock Out / Tag Out (LOTO). Test before touching. Use Residual Current Devices (RCDs).	L
Plumbing Modifications	Gas leaks, water leaks, hot water burns	Explosion, drowning, scalding	H	Use licensed plumber. Isolate gas and water. Ventilate area if using gas appliances.	M
Waterproofing	Chemical exposure, solvent fumes	Skin irritation, respiratory issues	M	Use in ventilated area. Wear nitrile gloves and mask. Read Safety Data Sheet (SDS).	L
Tiling & Cutting	Silica dust, blade contact	Silicosis, amputation	H	Use dust extraction or wet cutting. Wear P3 respirator. Use push sticks when cutting.	M
Site Clean-up	Waste debris, dust	Environmental contamination, eye irritation	L	Regular wet sweeping. Dispose of waste according to regulations.	L

4. Hierarchy of Controls

1. Elimination: Can the task be done differently to remove the hazard? [e.g., Prefabricated walls] 2. Substitution: Can a less hazardous material be used? [e.g., Low VOC adhesives] 3. Engineering: Can we change the equipment or process? [e.g., Using a wet saw] 4. Administrative: Can we change the way we work? [e.g., Job rotation, signage] 5. PPE: What must be worn? [See Section 5]

5. Personal Protective Equipment (PPE)

Mandatory PPE for all tasks:

• Safety Helmet (Class 1 or 2)
• High Visibility Clothing
• Safety Boots (Steel cap)

Task-Specific PPE:

• Eye Protection (Safety glasses/goggles) - For cutting and grinding
• Hearing Protection - For loud machinery
• Respiratory Protection (P2 or P3) - For dust and chemicals
• Cut-resistant Gloves - For tile handling
• Chemical resistant Gloves - For waterproofing
• Sun protection - For outdoor work

6. Emergency Procedures

Emergency Contact Numbers:

• Emergency Services: 000
• Supervisor: [ENTER NUMBER]
• Nearest Hospital: [ENTER NAME/LOCATION]

Procedures:

• Injury: Administer first aid, call 000, do not move patient unless necessary.
• Chemical Spill: Refer to SDS, contain spill, use absorbent material, ventilate area.
• Fire: Raise alarm, evacuate to assembly point [ENTER LOCATION], call 000.
• Electrical Shock: Do not touch person. Isolate power if safe. Call 000.

7. Training and Competency

Worker Sign-off confirms:

• I have read and understood this SWMS.
• I have participated in the consultation regarding this SWMS.
• I am trained and competent in the tasks listed.
• I know how to use the PPE provided.

8. Sign-off Section

Principal Contractor / PCBU Representative: Name: __________________________ Signature: ______________________ Date: ___________________________

Worker 1: Name: __________________________ Signature: ______________________ Date: ___________________________

Worker 2: Name: __________________________ Signature: ______________________ Date: ___________________________

Worker 3: Name: __________________________ Signature: ______________________ Date: ___________________________

Worker 4: Name: __________________________ Signature: ______________________ Date: ___________________________