Company Details

Company Name: [COMPANY NAME] ABN: [ABN] Address: [ADDRESS]

Job Details

Job Title: Security System Installation Site Address: [SITE ADDRESS] Date of Work: [DATE] Principal Contractor: [PRINCIPAL CONTRACTOR NAME] SWMS Prepared By: [NAME] Position: [POSITION] Date Prepared: [DATE]

High-Risk Construction Work Checklist

This SWMS applies if any of the following High-Risk Construction Work (HRCW) activities are involved:

• Work that involves a risk of a person falling more than 2 metres
• Work near an exposed live electrical installation
• Work in or near a confined space
• Work in or near a shaft or trench deeper than 1.5 metres

Activity Breakdown

List the specific tasks involved in this job:

1. [TASK 1, e.g., Pre-work site inspection and hazard identification]
2. [TASK 2, e.g., Cable pulling and routing]
3. [TASK 3, e.g., Mounting cameras and sensors]
4. [TASK 4, e.g., Electrical connections and testing]
5. [TASK 5, e.g., Programming and commissioning]

Hazard Identification, Risk Assessment and Control Measures

Task / Step	Potential Hazard	Risk Rating (Before Controls)	Control Measures (Hierarchy of Controls)	Risk Rating (After Controls)
[Enter Task from above]	[e.g., Falling from ladder]	[H/M/L]	Elimination: Can work be done from ground level?
Substitution: Use an Elevating Work Platform (EWP) instead of a ladder.
Engineering: Use a scaffold with edge protection.
Administrative: Develop a safe work procedure for ladder use. Use a spotter.
PPE: Non-slip footwear, safety helmet.	[H/M/L]
[Enter Task from above]	[e.g., Electric shock]	[H/M/L]	Elimination: Use battery-powered equipment where possible.
Substitution: N/A
Engineering: Use Residual Current Devices (RCDs) on power tools.
Administrative: Isolate power supply (Lock Out Tag Out). Test for live wires before drilling.
PPE: Insulated gloves, safety glasses.	[H/M/L]
[Enter Task from above]	[e.g., Manual handling injury]	[H/M/L]	Elimination: Order pre-cut cables.
Substitution: Use a cable tugger instead of pulling by hand.
Engineering: Use a trolley for heavy equipment.
Administrative: Team lifting for heavy loads. Rotate tasks.
PPE: Back support belt (if required), safety gloves.	[H/M/L]
[Enter Task from above]	[e.g., Exposure to asbestos]	[H/M/L]	Elimination: Do not disturb material.
Substitution: N/A
Engineering: Use negative pressure enclosure if removal needed.
Administrative: Review asbestos register. Do not drill asbestos.
PPE: P2 respirator, disposable coveralls.	[H/M/L]

Personal Protective Equipment (PPE)

List all PPE required for this job:

• Safety Helmet (AS/NZS 1801)
• Safety Glasses or Goggles (AS/NZS 1337)
• High Visibility Clothing (AS/NZS 4602)
• Safety Boots (AS/NZS 2210)
• Cut Resistant Gloves
• Hearing Protection (AS/NZS 1270)
• Insulated Gloves (if electrical work)
• Use (if working at heights)
• Sun Protection (Hat, Sunscreen, Long Sleeves)

Emergency Procedures

Emergency Contact Numbers:

• Emergency Services: 000
• Site Contact: [NAME] - [PHONE NUMBER]
• Supervisor: [NAME] - [PHONE NUMBER]
• Nearest Hospital: [HOSPITAL NAME] - [ADDRESS]

Emergency Assembly Point: [LOCATION]

Incident Reporting: All incidents, near misses, and injuries must be reported to the supervisor immediately. An Incident Report Form must be completed.

Safety Sign-Off

I have read and understood the contents of this SWMS. I agree to follow all control measures and use the provided PPE.

Worker Name	Worker Signature	Date
[WORKER 1]		[DATE]
[WORKER 2]		[DATE]
[WORKER 3]		[DATE]

Principal Contractor / PCBU Representative:

Name: ______________________________ Signature: __________________________ Date: ______________________________

Review and Amendments

This SWMS must be reviewed:

• If a control measure fails
• If a new hazard is identified
• If there is a change to the work method
• At least every 2 years

Review Date: [DATE]