Company Details

Company Name: [INSERT COMPANY NAME] ABN: [INSERT ABN] Address: [INSERT ADDRESS]

Project / Job Details

Project Name: [INSERT PROJECT NAME] Project Address: [INSERT SITE ADDRESS] Date of Preparation: [INSERT DATE] Date of Work: [INSERT START DATE] to [INSERT END DATE]

Task Description

[List specific waterproofing tasks, e.g., Application of torch-on membrane to podium deck, Liquid membrane application to bathrooms, Sheet membrane installation to planter box.]

Persons Responsible

Principal Contractor (PCBU): [NAME] Site Supervisor: [NAME] Worker Representative: [NAME]

Hazard Identification and Risk Assessment

Step / Task	Hazard	Risk Before Controls	H/M/L	Who is at Risk	Control Measures (Hierarchy of Controls)	Risk After Controls	H/M/L
Preparation of surface	Silica dust from grinding	High	M	Worker, Public	1. Use wet cutting methods. 2. Use vacuum attachment. 3. Wear P2 respirator.	Low	L
Chemical handling (Solvents, Isocyanates)	Skin absorption, Inhalation	Extreme	H	Applicator	1. Use low VOC products. 2. Ensure mechanical ventilation. 3. Wear chemical resistant gloves and mask.	Low	L
Working at heights (Balconies, Roofs)	Fall from height	High	H	Applicator	1. Install edge protection. 2. Use scaffolding. 3. Wear full body use and lanyard if required.	Low	L
Using blow torches (Torch-on)	Burns, Fire	High	H	Applicator	1. Keep fire extinguisher nearby. 2. Clear flammable materials. 3. Use heat resistant gloves.	Low	L
Confined spaces (Lift pits, Small bathrooms)	Lack of oxygen, Fume buildup	Extreme	H	Applicator	1. Conduct air monitoring. 2. Use blower fan for ventilation. 3. Install gas monitoring alarm.	Low	L

Personal Protective Equipment (PPE)

• Safety Helmet (AS/NZS 1801)
• High Visibility Clothing (AS/NZS 4602)
• Safety Boots (AS/NZS 2210)
• Cut Resistant Gloves
• Chemical Resistant Gloves (Nitrile/Butyl)
• Respiratory Protection (P2 or Organic Vapour Cartridge)
• Safety Glasses / Goggles
• Sun Protection (Long sleeves, Hat)

Emergency Procedures

Fire: Raising the alarm, call 000, use nearest fire extinguisher if safe to do so. Chemical Spill: Contain spill, absorb with inert material, place in marked container, dispose as hazardous waste. Injury/Exposure: Stop work, apply first aid, seek medical attention (refer to SDS), notify supervisor. Evacuation Point: [INSERT ASSEMBLY POINT]

Training and Competency

Worker Name: [NAME] | License No: [NO] Induction Completed: [ ] Yes | [ ] No Task Specific Training: [ ] Chemical Handling | [ ] Working at Heights | [ ] Asbestos Awareness SDS Read and Understood: [ ] Yes | [ ] No

Sign Off

I have read and understood the contents of this SWMS. I agree to follow all control measures listed.

Worker Signature: __________________ Date: //____ Supervisor Signature: __________________ Date: //____