PropoDoc provides self-help document templates and tools. It is not a law firm and does not provide legal advice. Learn more.
Skip to main content
Example
form

SWMS - Stonemason Example

Example document for SWMS - Stonemason. Use this as a reference when creating your own.

Professional Review Required

This document involves significant legal, financial, or compliance considerations. You must have a qualified professional review and approve this document before use. Do not rely on this template as legal advice.

Document: SWMS - Stonemason

Example Document

Last updated 7/30/2026

SWMS - Stonemason Example

Company: Elite Stone Works Site: 123 Smith Street, Brisbane, QLD Date: 12 October 2023

1. JOB DETAILS

Project: Kitchen Benchtop Installation - Phase 1 Specific Work: Installation of 40mm Natural Marble Benchtops on ground floor and first floor. Cutting of sink holes on site. High Risk Work: Manual handling (over 100kg slabs), Use of handheld cutters (Silica), Working at heights (MEWP for first floor install).

2. PERSONNEL

Supervisor: John Smith Workers: Mike Ross (Grinder/Installer), Dave Lee (Laborer)

3. TASK BREAKDOWN

  1. Unload marble slabs from truck using forklift and trolley.
  2. Carry slabs into ground floor kitchen.
  3. Set up exclusion zone for cutting sink holes.
  4. Wet cut sink holes using angle grinder with water attachment.
  5. Transport first floor slabs via scissor lift.
  6. Install and seal benchtops.

4. HAZARDS & RISKS

ActivityHazardRiskControls
Moving SlabsCrush injuryHighUse A-frame trolley and slab lifters. 2 persons per slab.
Cutting Sink HolesSilica dustExtremeWet cutting only. P3 Respirator. Exclusion zone 4m.
First Floor InstallFall > 2mHighUse Scissor Lift with harness restraint.
Using GrinderKickbackMediumCheck disc for cracks. Firm grip. Two handed operation.

5. CONTROL MEASURES

Silica Control

  • Marble contains silica. All cutting must be done wet.
  • A hose is attached to the grinder providing constant water.
  • The floor is wet mopped immediately after cutting. No dry sweeping.
  • Mike wears a fit-tested P3 respirator and safety glasses.

Manual Handling

  • Slabs are 2.4m long. Two people required.
  • Use a heavy-duty stone trolley with rubber wheels.
  • Ensure path is clear of cords and debris.

Working at Heights

  • Scissor lift is hired and inspected daily.
  • Harness worn and clipped to the anchor point inside the lift.
  • No leaning over the guard rails of the lift.

6. PPE

  • Hard hats (Yellow)
  • High vis shirts
  • Steel cap boots
  • P3 Respirators (Mike)
  • Safety glasses
  • Ear muffs
  • Gloves

7. SIGN-OFF

John Smith: (Signature) Mike Ross: (Signature) Dave Lee: (Signature)

Notes

This example shows a realistic scenario for a kitchen installation. Note the specific emphasis on wet cutting for marble (silica control) and the use of mechanical aids (trolley/lift) for manual handling. The sign-off section captures all workers on site.

About this Example

Part of the SWMS - Stonemason document collection

Document Type

SWMS - Stonemason

A Safe Work Method Statement for Stonemasons carrying out high-risk construction work like stone installation, cutting, and structural work.

Complexity

complex

Risk Level

high